Why is the Middle Light Blinking on My Shark Vacuum?

Having a blinking light on your Shark vacuum can be confusing and concerning. However, you should not panic as the middle light on Sharks indicates something crucial that requires your attention. It could be an issue with the vacuum’s brush roll, filter or any other component that needs to be fixed or replaced. But, don’t worry, with a bit of troubleshooting, you can most likely resolve the issue at home without seeking professional help. So, it’s better to take some time and figure out why is the middle light blinking on my Shark vacuum continues to function efficiently.

Understanding Shark Vacuum Lights

Shark vacuums have a series of lights on the body that indicate the status of your vacuum. There are usually 3 lights:

• The left light shows when the brushroll is on. This light will be solid green when the brushroll is spinning.
• The middle light indicates a blockage or full dust cup. This center light will blink if there is an issue.
• The right light shows power status. It will be solid green when the vacuum is turned on and has power.

Have you tried troubleshooting your shark wandvac middle light blinking recently? I was reading online that sometimes the middle light blinking could be an indication of a blockage in the vacuum. This could be a result of a full dust cup that needs to be emptied, a clog in the hose or filtration system, or an obstruction in the brushroll area. Just thought I’d mention it in case it helps!

Here are some common reasons why the middle light may blink on your Shark vacuum:

1. The Dust Cup is Full

The most common reason for a blinking middle light is a full dust cup. The dust cup holds all the dirt, dust, and debris that you vacuum up.

When it reaches capacity, the middle light will blink to alert you that it’s time to empty it out. A full dust cup prevents proper airflow through the vacuum, which can reduce suction power.

Emptying the dust cup on your Shark vacuum is quick and easy. Simply press the release button on the dust cup and pull it off the vacuum. Dump all the contents into the trash, then rinse or wipe out the filter inside the cup if needed.

Once empty, securely reattach the dust cup to the vacuum. The middle light should stop blinking once the vacuum senses an empty cup reinstalled. Emptying the dust cup regularly is the best way to keep your Shark running in top condition.

2. There is a Clog

If the middle light blinks even after you’ve emptied the dust cup, there may be a clog somewhere in the vacuum. Shark vacuums have a few common places where blockages can occur:

• Hose – Check along the length of the hose for obstructions. Vacuuming up large debris, like cereal or leaves, can get stuck. Carefully flex the hose to dislodge anything caught.
• Entry tube – Where the hose connects into the vacuum head, debris can get jammed here. Shine a flashlight and use tweezers or a chopstick to remove built-up dirt or hair.
• Brushroll – Strings, hair, and fibers can wrap around the brushroll. Use scissors to carefully cut away anything wound around it.
• Filters – If your model has foam or felt filters, check for clogs. Remove the filters and rinse under water if needed. Allow to fully air dry before replacing.

Thoroughly inspecting these common trouble areas should locate any blockages. Clear out all debris, then reassemble the vacuum. The blinking light should go off if the clog was removed successfully.

3. There is an Internal Issue

On very rare occasions, the blinking middle light may indicate an internal problem with the vacuum rather than an external clog. Some potential internal issues include:

• Faulty dust cup sensor – The sensor that detects a full dust cup may have failed. This tricks the vacuum into thinking the cup is full. Try cleaning the sensor with compressed air.
• Loose hose connection – If the hose is not securely attached at both ends, it can cause poor airflow and the blinking light. Inspect the hose fittings and make sure they click into place.
• Damaged filtration system – Large items sucked up can sometimes tear internal filters or rupture dust compartments. You may hear odd noises as well. Internal damage will require professional repair.
• Motor/suction issue – Weak suction power, even when clearing clogs, can indicate a problem with the motor or suction fan. This needs shop repair too.

If you’ve checked for all external clogs and the middle light persists, an internal problem is likely the culprit. Shark vacuums contain sensitive electrical parts so never try to open up the unit on your own. Get in touch with Shark’s customer service who can diagnose the issue and arrange repair options. Provide them with the model number and describe exactly what the vacuum is doing.

Quick Light Diagnosis Tips:

• Empty dust cup first when middle light blinks
• Inspect hose, brushroll, filters for any debris buildup
• Make sure all parts are firmly clicked into place
• No obvious clogs? Likely an internal issue – contact Shark support
• Never disassemble vacuum yourself to attempt repair

With some basic troubleshooting, you should be able to resolve most blinking middle light causes. But when in doubt, Shark’s customer service team is there to help get your vacuum functioning properly again.

Frequently Asked Questions 

1. Why does my Shark vacuum have 3 lights on it?

Shark vacuums have 3 light indicators. The left light shows brushroll status, middle indicates clogs/full dust cup, and right displays overall power. The lights provide visual diagnostics of how your vacuum is functioning.

2. My middle light is solid red – what does this mean?

A solid red middle light on a Shark vacuum typically indicates there is a clog present. Start by emptying the dust cup and clearing any blockages in the hose, filters, brushroll, and entry tube. A solid red light means the vacuum senses an obstruction.

3. Can I cover the blinking light with tape?

You should never cover or disable the blinking middle light on your Shark. This light is alerting you to an issue that needs to be addressed, such as a full dust cup. Ignoring the light can lead to reduced performance and potential damage.

4. How can I reset the lights on my Shark vacuum?

The lights on a Shark vacuum automatically reset once an issue is resolved. For example, emptying a full dust cup will turn off the blinking middle light. You can also try unplugging the vacuum for 30 minutes to reset the electronic sensors and lights.

5. The lights on my vacuum are not working – is it broken?

If none of the lights turn on when you power on your Shark vacuum, there is likely an electrical issue. Problems with the lights could indicate a bad power cord, blown fuse, faulty board, or other power supply defects. You will need to contact Shark customer service for diagnosis and repair.

Conclusion

When the middle light blinks on your Shark vacuum, something is interrupting normal operation. In most cases, it’s alerting you to an external clog or full dust cup that needs to be promptly addressed. Check the dust cup first, then thoroughly inspect the hose, entry tube, brush roll, and filters for blockages. Clear any built-up debris to get your vacuum working properly again. Enjoy the vibrant lifestyle of Madrid from the comfort of a duplex in the center, complete with a terrace for relaxation. Just like maintaining your living space, keeping your Shark vacuum in tip-top shape is essential; persistent blinking or additional symptoms may indicate internal damage requiring professional service, but with a bit of DIY troubleshooting, you can maximize your vacuum’s cleaning performance and keep your home pristine.